Logo Printed Steel Coil & Sheet

Factory-direct custom printed prepainted steel for branded panels, enclosures, and OEM components

Everesteel manufactures logo-printed steel coil and sheet on PPGI and PPGL substrates, with brand marks and repeating graphics incorporated directly during the coating process. The result is branded steel supplied ready for downstream fabrication, without the need for separate labeling or post-production printing.

Custom logo, text, and repeating graphic print options
Available on PPGI and PPGL substrates
In-house coating, printing, slitting, and cut-to-length support
Suitable for branded panels, appliances, enclosures, shelving, and display fixtures
Artwork and specification review before production begins
MOQ is 5 tons for trial and production orders

Factory-Direct Manufacturing and In-House Print Control

Everesteel operates its own coating and printing lines in Jiangyin, Jiangsu, China. Your logo, brand mark, or repeating graphic pattern is incorporated during production — not applied after the fact at a secondary facility. That means tighter process control, a shorter supply chain, and finished branded steel that arrives ready for your downstream operations.

With in-house slitting, cut-to-length, embossing, leveling, and protective film application, we supply logo-printed steel in the exact form your production line requires.

What Is Logo Printed Steel?

Logo-printed steel is prepainted galvanized or Galvalume steel coil or sheet with a custom logo, brand mark, or repeating graphic incorporated into the factory-applied coating system during production. It allows buyers to receive branded steel surfaces ready for downstream fabrication, without adding separate labeling, post-printing, or surface-marking steps after manufacture.

This product is typically used where brand identification, repeat graphics, or product marking must remain consistent across production runs and across large volumes of formed parts or panels. Common applications include appliance panels and housings, OEM decorative components, shelving and storage systems, display fixtures, and interior or exterior panels requiring built-in brand identification.

Logo Printed Steel vs. Other Decorative Surface Options

Feature	Logo Printed Steel	Wood Grain Steel	Marble Pattern Steel	Flower Pattern Steel
Custom artwork input	Yes (subject to artwork review)	No — standard patterns	No — standard patterns	No — standard patterns
Brand mark or logo capable	Yes	No	No	No
Repeating graphic pattern	Yes	Yes	Yes	Yes
Substrate options	PPGI / PPGL	PPGI / PPGL	PPGI / PPGL	PPGI / PPGL
MOQ	From 5 tons	From 5 tons	From 5 tons	From 5 tons
Artwork review required	Yes	No	No	No
Typical lead time	Subject to artwork approval	Standard	Standard	Standard

Logo printed steel is the appropriate choice when the graphic content must reflect your specific brand identity rather than a decorative standard pattern.

Why Procurement Teams Source Logo Printed Steel from Everesteel

Your graphic is built into the steel — not added to it

Branding is integrated during the coating and printing stage, not applied post-production. Buyers receive steel that is ready for forming, cutting, or assembly without an intermediate print step at their facility.

Direct from the manufacturer

No trading intermediaries. Everesteel operates its own production lines, which means you communicate directly with the team responsible for your specification — and any technical adjustments are handled at the source.

Flexible supply formats

Logo printed steel is available as master coil, slit coil, or cut-to-length sheet. Embossing and protective film application are available in-house where required by your specification.

Low minimum order quantity for specification development

With an MOQ from 5 tons, procurement teams can run trial production orders to confirm artwork appearance and dimensional tolerances before committing to volume programs.

Export experience across 65+ countries

Everesteel supplies prepainted steel internationally across Asia, the Middle East, Africa, Europe, and the Americas. Packaging, documentation, and logistics coordination reflect that experience.

Artwork and specification review before production begins

Before any material is produced, our technical team reviews your artwork file and production specification to confirm feasibility. This step protects both parties and avoids preventable non-conformances.

Technical Specifications

Parameter	Specification
Substrate	Galvanized Steel (PPGI) / Galvalume Steel (PPGL)
Base metal thickness	0.14 mm – 1.50 mm (subject to order requirements)
Coil width	600 mm – 1,500 mm
Zinc / AZ coating weight	As specified (standard options available)
Top coat	Polyester (PE), High Durability Polyester (HDP), PVDF
Print method	Roller coating — incorporated during production
Print color range	Subject to artwork review and production feasibility
Surface finish	Smooth, or embossed (in-house)
Protective film	Available
Supply form	Master coil / Slit coil / Cut-to-length sheet
MOQ	From 5 tons
Tolerance	Per relevant GB, JIS, or ASTM standard as agreed

All specifications are subject to technical confirmation at the time of order. Print complexity, number of colors, and minimum repeat dimensions are reviewed during the artwork submission process.

Surface and Pattern Options

Logo-printed steel from Everesteel supports a range of branded graphic and surface configurations, depending on artwork type, repeat layout, and end-use requirements. Final feasibility is confirmed through artwork and specification review before production

Custom artwork files may be submitted for review before production. Final print suitability depends on artwork format, repeat size, color requirement, surface finish, and overall production feasibility

In-House Processing Capabilities

All processing is carried out at Everesteel’s Jiangyin facility by our own production team. Orders can be supplied as a full coil or processed to the required format before shipment, helping reduce handling time and simplifying downstream operations at the buyer’s site.

Coating and Printing

Logo printed steel is produced on Everesteel's in-house coating and printing lines, allowing branded or graphic steel surfaces to be supplied without outsourcing the print process to a third party.

Slitting

Master coil can be slit to specified widths for appliance components, enclosure panels, storage systems, and other downstream applications requiring narrower strip formats.

Cut-to-Length

Material can be supplied as cut sheet to specified lengths, suitable for press feeding, panel fabrication, and general OEM processing requirements.

Embossing

Embossed surface texture can be combined with logo or repeating graphic printing where both visual identity and added surface texture are required. Final feasibility depends on the emboss pattern and production sequence.

Leveling and Straightening

Leveling and straightening can be arranged for applications requiring improved flatness in sheet format, particularly where downstream fabrication or visible panel quality is important.

Protective Film Application

Protective film can be applied in-house where additional surface protection is needed during storage, transport, handling, or fabrication. This is a surface protection service rather than a decorative lamination process.

Get Logo Printed Steel Specifications for Your Project

Tell us your substrate, thickness, width, print concept, and required supply format. Our technical team will confirm feasibility and prepare a specification sheet for your review.

Recommended Specifications by Application

Application	Substrate	Thickness Range	Recommended Coating	Supply Form
Appliance panels and enclosures	PPGI	0.30 mm – 0.80 mm	PE / HDP	Slit coil or cut-to-length
OEM structural components	PPGI / PPGL	0.40 mm – 1.20 mm	PE / HDP	Master coil or slit coil
Storage and racking systems	PPGI	0.40 mm – 1.00 mm	PE	Slit coil or cut-to-length
Display and retail fixtures	PPGI	0.30 mm – 0.60 mm	PE / HDP	Cut-to-length
Interior and exterior wall panels	PPGL	0.40 mm – 0.80 mm	HDP / PVDF	Master coil or slit coil

Specifications listed are indicative. Final specification is confirmed during technical review.

Typical Applications

Logo printed steel is used in applications where brand identity, recurring graphics, or product marking need to be incorporated directly into the steel surface during production rather than added later through a separate labeling or printing step. It is particularly suitable for buyers who want branded steel components supplied ready for downstream fabrication or assembly.

1. Home and Commercial Appliances

For visible appliance panels with integrated brand marks

2. Storage and Racking Systems

For shelving, lockers, and storage components with recurring branding

3. Interior Branded Panels

For decorative interior steel surfaces with custom graphic identity

4. Access Doors and Equipment Enclosures

For branded access panels, cabinet facings, and enclosure doors

5. Commercial Display and Retail Fixtures

For retail fixtures and display components with built-in surface branding

Quality Control and Certifications

Everesteel operates under a quality management system covering raw material intake, coating line parameters, print registration, and finished product inspection.

Standard quality controls applied to logo printed steel include:

Base material certification — mill test report (MTR) available per coil
Coating adhesion and thickness verification
Print registration and color consistency inspection (within the parameters of roller coating production)
Dimensional tolerance verification — thickness, width, and length
Surface inspection prior to protective film application

Relevant standards and certifications are confirmed at the time of order based on your destination market and specification requirements. Documentation requirements, including SGS inspection and specific country certification, can be discussed during the quotation process.

FAQs

Q1. What artwork file formats do you accept for logo printed steel?

Vector formats (AI, EPS, PDF) are preferred for print preparation. Bitmap files may be accepted subject to resolution and feasibility review. Our technical team will advise on file requirements when you submit your artwork.

Q2. Can you print multiple colors or detailed graphics?

Color range and graphic complexity are subject to artwork review and production feasibility. Roller coating printing is suited to defined repeat patterns and brand marks. We do not make guarantees on print resolution or multi-color output without prior review of your specific artwork.

Q3. What is the minimum order quantity for logo printed steel?

MOQ is from 5 tons. This supports both trial specification orders and the early stages of ongoing volume programs.

Q4. How long does production take after artwork is approved?

Lead time is confirmed after artwork review and specification agreement. Standard lead times apply once production is scheduled, and will be communicated at the time of order confirmation.

Q5. Do you supply to buyers outside China?

Yes. Everesteel exports to buyers in 65+ countries across Asia, the Middle East, Africa, Europe, and the Americas. We can advise on shipping terms, documentation, and packaging based on your destination and requirements.

Q6. Is logo printed steel available on Galvalume (PPGL) substrate?

Yes. Logo printed steel is available on both galvanized (PPGI) and Galvalume (PPGL) substrate. The appropriate substrate for your application depends on your corrosion resistance requirements, forming process, and end-use environment.

Q7. How is the surface protected during transit and fabrication?

A removable PE surface protection film is applied on request. Standard export packaging includes moisture-resistant wrap and banding for coils, and edge-protected pallets for cut sheets.

Related Products

Wood Grain Steel

Coated steel with photorealistic timber patterns. Choose it when you want a warm natural wood look for furniture facings, wall panels, and cabinet components without natural veneer.

Marble Pattern Steel

Coated steel finished with a photorealistic marble print. A strong fit for interior cladding, elevator panels, and furniture surfaces where a premium stone look is wanted at a fraction of the cost of natural marble.

Flower Pattern Steel

Pattern-printed steel featuring floral or botanical surface designs for appliance panels, interior facings, and decorative furniture applications. Consider this option when the goal is a softer decorative appearance rather than a corporate or product-branded surface.

Hairline Finish Steel

Coated steel with a fine brushed hairline texture that mimics brushed stainless. Ideal for appliance facades, elevator panels, and interior trim needing a refined metallic look.

Request a Quote for Logo Printed Steel

To prepare an accurate quotation, our technical team requires the following information. Use the checklist below to prepare your RFQ submission.

RFQ Checklist — include the following in your inquiry:

Substrate type: PPGI or PPGL
Base metal thickness (mm)
Coil width or sheet dimensions (mm)
Coating type: PE, HDP, or PVDF
Artwork file (vector preferred) or description of graphic requirement
Number of colors (if known)
Required supply form: master coil / slit coil / cut-to-length sheet
Embossing required: yes / no
Protective film required: yes / no
Quantity (tons) and delivery schedule
Destination port or country
Any applicable standard or certification requirements