Custom Color Coated Steel
Made-to-order coated steel for brand-matched colors, OEM finishes, and project-specific production
When standard coated steel does not match your brand, application, or specification, Everesteel produces custom color coated steel to your target. From substrate and paint system selection to color matching and finish development, we support made-to-order production for OEM, appliance, architectural, and interior uses.
- Multiple substrate and paint system combinations available based on end-use requirements
- Color matching from physical samples, RAL codes, or Pantone references
- Custom patterns, texture effects, and OEM-specific finish development
- Slit coil and cut-to-length supply available
- MOQ from 5 tons for sampling and production supply
Own Factory, Own Coating Lines, Full Specification Control
Everesteel designs and manufactures prepainted steel coils and sheets at our factory in Jiangyin, Jiangsu — one of China’s primary steel processing hubs. With 26,000+ tons of annual production capacity, we support procurement teams and panel manufacturers across 65+ countries, from initial sample approval through to full-volume orders.
We are not a trading company. Every coil that leaves our facility is produced on our own coating and processing lines, giving you direct control over specifications, lead times, and quality outcomes.
26,000+
tons annual production capacity
6,800+
global buyers served
65+
countries supplied worldwide
98.7%
on-time delivery rate
What is Custom Color Coated Steel?
Custom color-coated steel is prepainted steel produced to your exact specification rather than from a fixed stock range. You define the combination — the substrate, the paint system, the color, the gloss, and the surface pattern — and we formulate and coat it to match.
Standard prepainted products like PPGI, PPGL, PPAL, and PPCR each fix one substrate to a set range of finishes. Custom color-coated steel removes those limits. You can pair a galvalume substrate with a PVDF topcoat in a brand-specific Pantone shade, or run a cold-rolled base with a custom wood grain print for interior work — whatever your project actually requires.
What this means: if you have a target color swatch, a brand palette, an OEM finish standard, or a pattern that isn’t in a normal catalog, this is the route to get it produced accurately and repeatably. You send the reference; we match it and lock the formula for repeat orders.
Custom color-coated steel is most commonly ordered by OEM brands, panel manufacturers, and project buyers who need color consistency, exact finishes, or non-standard specifications across recurring production runs.
Custom vs PPGI / PPGL / PPAL / PPCR: Which Should You Choose?
All five are prepainted products. The difference is how much of the specification is fixed versus made to order.
| Factor | Custom Coated | PPGI | PPGL | PPAL | PPCR |
|---|---|---|---|---|---|
| Substrate | Any (GI / GL / Al / CR) | Galvanized | Galvalume | Aluminum | Cold-rolled |
| Color | Any custom match | RAL/Pantone standard | RAL/Pantone standard | RAL/Pantone standard | RAL/Pantone standard |
| Pattern | Custom / non-standard | Stock range | Stock range | Stock range | Stock range |
| Paint system | Any (PE/SMP/HDP/PVDF) | Standard options | Standard options | Standard options | Standard options |
| Best for | Brand-matched, OEM, non-standard | General galvanized use | Outdoor/coastal | Weight-sensitive | Dry interior |
| Cost level | Varies with spec | Economical | Premium | Premium | Most economical |
- Choose a standard product when your requirement fits an existing spec. Choose custom color-coated steel when your color, finish, substrate, or pattern combination isn’t available off the shelf — and needs to stay consistent across orders.
Why Buyers Source Custom Color Coated Steel from Everesteel
One Supplier for Any Substrate and Paint Combination
Because we coat galvanized, galvalume, aluminum, and cold-rolled substrates on our own lines, we can pair any base metal with any paint system in a single order. You don't need one supplier for outdoor PVDF panels and another for interior PE parts — we produce both to matched color standards under one roof, simplifying your sourcing and keeping finishes consistent across a mixed project.
Accurate Color Matching, Locked for Repeat Orders
Submit a physical sample, RAL code, or Pantone reference, and our technical team formulates a matched batch and produces a lab drawdown for your approval. Once you sign off, we record the formula so future orders reproduce the same shade and gloss. We measure color and gloss against your approved standard on every batch, holding tight batch-to-batch consistency across recurring production.
Non-Standard Patterns and OEM Finishes, Produced In-House
Custom wood grain, stone effect, tooled emboss profiles, and brand-specific textures are produced on the same equipment as our standard lines, so you're not limited to a catalog. For OEM buyers with a defined finish standard, we work from your specification and confirm it on a production sample before the full run — one supplier accountable for the match.
A Pre-Finished Coil That Removes Your Painting Step
Every custom coil leaves our line ready to fabricate — no painting booths, drying ovens, or secondary finishing at your factory. This cuts a full process step from your line and removes the inconsistency of in-house painting. Adhesion is verified with cross-cut and T-bend testing on every batch, so the coating holds through forming and stamping.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Custom color coated steel coil & sheet |
| Substrate options | Galvanized (GI), Galvalume (GL), aluminum, cold-rolled (CR) |
| Metallic coating | Z60–Z275 (GI), AZ30–AZ150 (GL), per substrate |
| Base thickness | 0.12 mm – 1.5 mm (substrate-dependent) |
| Coil width | 600 mm – 1,600 mm (slit widths available) |
| Paint system | PE, SMP, HDP, PVDF, epoxy, specialty systems |
| Top coat thickness | 5 – 25 microns (primer + topcoat system) |
| Finish options | High gloss, matte, semi-gloss, wrinkle, embossed, anti-fingerprint |
| Color | Fully custom — RAL, Pantone, or physical sample match |
| Pattern | Solid, wood grain, stone/marble, custom print or emboss |
| Coil inner diameter | 405 mm / 508 mm / 610 mm |
| Coil weight | 1 – 8 tons per coil (substrate-dependent) |
| Surface treatment | Chromate or chromate-free pretreatment (RoHS-compliant) |
| Standards | ASTM, JIS, EN, or agreed project standard by substrate |
| Typical applications | OEM panels, brand-matched cladding, decorative interiors, appliances |
- Specifications are indicative. Custom substrates, coatings, gauges, widths, colors, and patterns are available on request. Minimum order quantity: 5 tons.
Surface and Pattern Options
Custom color-coated steel is built around the finish you specify. The options below are starting points — any can be adjusted or combined to match your requirements.
Solid Colors
Any single-tone finish matched to your RAL code, Pantone reference, or physical sample — the foundation for brand-matched cladding, appliance panels, and OEM parts.
Matte / Low Gloss
Flat, low-reflection finishes tuned to your target gloss value, widely specified for modern facades and premium interior surfaces.
High Gloss
Bright, high-reflectivity finishes for decorative panels, display fixtures, and applications where a clean, mirror-smooth surface is required.
Wrinkle / Texture Finish
Structured surfaces that improve scratch resistance and hide handling marks — useful for equipment housings and utility panels.
Wood Grain Print
Photorealistic timber patterns matched to your chosen species and tone, for cladding, ceilings, furniture, and decorative interiors.
Stone / Marble Effect Print
Decorative stone-effect surfaces for feature facades, entrance cladding, and commercial fit-out projects that need a premium look.
Anti-Fingerprint Coating
Topcoat formulation that resists surface smudging — specified for high-touch panels and premium appliance surfaces.
Custom Patterns and Textures
Non-standard prints, tooled emboss profiles, and brand-specific textures produced to your artwork or reference sample, confirmed on a production sample before the full run.
Processing Capabilities
Downstream processing is available in-house, so your custom coated steel can arrive in the format your production line actually needs — not just as master coil.
Slitting
Coils are slit to custom widths from 20 mm and above, with tight tolerances and clean edges suited to panel forming, roll-forming, and profile lines.
Cut-to-Length
Sheet blanks cut to your dimensions with flatness and squareness tolerances suitable for direct press, stamping, or panel-forming feeding.
Embossing
Structural or decorative emboss patterns applied in-line, including linen, stucco, and custom tooled profiles matched to your design.
Lamination
Protective or decorative films applied over the coated surface for transit protection, added scratch resistance, or a specific decorative effect.
Custom Color Matching
Submit a physical sample, RAL code, or Pantone reference, and our technical team formulates a matched batch — with a lab drawdown and production sample provided for approval before the full run begins, and the formula recorded for repeat orders.
Sourcing a brand-matched or OEM finish for your project?
Send your substrate, thickness, color reference, and pattern, and our team will confirm lead time and pricing within one business day.
Recommended Specifications by Application
| Application | Recommended Substrate | Thickness | Paint System | Surface |
|---|---|---|---|---|
| Brand-matched cladding | Galvalume / aluminum | 0.40 – 1.00 mm | PVDF / HDP | Custom color, matte |
| OEM appliance panels | Galvanized / cold-rolled | 0.30 – 0.60 mm | PE / epoxy | Custom color, anti-fingerprint |
| Decorative interior panels | Cold-rolled / aluminum | 0.40 – 0.70 mm | PE / HDP | Wood grain / stone / custom |
| Feature facades | Aluminum / galvalume | 0.70 – 1.20 mm | PVDF | Custom color, stone, matte |
| Signage and display | Aluminum / galvanized | 0.30 – 0.80 mm | PE / PVDF | High gloss / custom color |
| Branded retail fixtures | Cold-rolled / aluminum | 0.40 – 0.80 mm | PE | Custom color / pattern |
- These are indicative starting points. Final specifications should be confirmed based on your application environment, forming process, and target service life.
Typical Applications
Quality Control and Certifications
Everesteel maintains a documented quality management system across every stage of production — from incoming substrate inspection through to final coil labeling and packaging.
In-process controls include:
- Incoming substrate inspection (thickness, coating weight or grade, mechanical properties)
- Paint film thickness measurement at the coating line
- Adhesion testing (cross-cut and T-bend)
- Color and gloss measurement against your approved reference standard
- Salt spray and humidity cabinet testing for exterior grades
- Final dimensional check before packaging
Test reports and mill certificates are issued with each shipment. Third-party inspection — including SGS, BV, and CCIC — can be arranged before loading on request.
FAQs
Q1. How does the custom color matching process work?
Send us a physical sample, RAL code, or Pantone reference. Our technical team formulates a paint batch and produces a lab drawdown — a small coated panel — for you to review. Once you approve the color and gloss in writing, we produce a full production sample, then schedule mass production. We record the approved formula so repeat orders reproduce the same shade.
Q2. Which substrates can I choose for a custom order?
You can specify galvanized (GI), galvalume (GL), aluminum, or cold-rolled (CR) as the base, depending on your environment and performance needs. We pair your chosen substrate with the paint system and color you require. Our team can advise on the best substrate if you tell us the application and exposure conditions.
Q3.What is your minimum order quantity for custom color coated steel?
Our standard minimum order quantity is 5 tons per specification. Because custom colors and patterns involve setup and formulation, we recommend 5–10 tons per color to keep the unit cost efficient. Contact us to discuss your project volume and color count.
Q4. How long does a custom color take to produce?
Lab drawdown and sample approval typically takes 5–10 working days after we receive your reference. Once the color is approved, standard production lead time is 15–25 days from order confirmation and deposit. New or complex formulations may add a few days for approval.
Q5. Can I get a sample approved before committing to a bulk order?
Yes, and we recommend it for every custom order. You receive a lab drawdown first, then a production sample once the color is confirmed. Mass production only starts after you approve the sample in writing, so there are no surprises on the full run.
Q6. Can you match my exact brand color or corporate palette?
Yes. Provide a physical sample or a precise reference (RAL or Pantone), and we match it as closely as the paint system allows, typically targeting a tight Delta E tolerance. For brand programs, we archive the approved formula so every future order stays consistent with your palette.
Q7. Can you produce custom patterns as well as custom colors?
Yes. Alongside custom colors, we produce non-standard wood grain, stone effect, and tooled emboss patterns from your artwork or reference sample. We confirm the pattern on a production sample before the full run begins.
Q8. Can custom orders be supplied as slit coil or cut sheet?
Yes. We operate slitting and cut-to-length lines on-site and can supply custom coated steel as master coil, slit coil, or cut-to-length sheet to your dimensions. Sheets are stacked, interleaved with protective paper where required, and packaged for export.
Related Products
PPGI Coil & Sheet
PPGL Coil & Sheet
PPAL Coil & Sheet
PPCR Steel
PCM Steel
Ready to Source Custom Color Coated Steel? Start with the Right Information.
Send us the details below and our team will respond with pricing, lead time, and availability within one business day.
- Application — what the material will be used for (e.g., facade panel, appliance housing, sign face)
- Substrate preference — galvanized, galvalume, aluminum, cold-rolled, or not sure yet
- Thickness — in millimeters (e.g., 0.50 mm)
- Width — in millimeters (e.g., 1,000 mm)
- Paint system — PE, SMP, HDP, PVDF, epoxy, or not sure yet
- Color reference — RAL code, Pantone number, or physical sample
- Pattern / finish — solid, wood grain, stone, custom pattern, gloss level
- Quantity — in metric tons, and whether one-time or recurring
- Destination country — for freight and lead time estimation