Patterned & Decorative Steel Coil & Sheet
Everesteel manufactures patterned and decorative steel coil and sheet at our own factory in Jiangyin, Jiangsu — supplying procurement teams and panel manufacturers across 65+ countries with wood grain, marble pattern, flower pattern, logo-printed, and hairline-finish steel, produced on our own coating and printing lines with an annual production capacity of 26,000+ tons.
Own Factory. Own Coating Lines. Full Specification Control.
Everesteel (Jiangyin Everest Steel Co., Ltd.) designs and manufactures patterned and decorative steel coil and sheet at our production facility in Jiangyin, Jiangsu — one of China’s primary steel processing hubs, in the greater Wuxi area.
We are not a trading company. Every coil that leaves our facility is printed, coated, or finished on our own decorative processing lines. That means you deal directly with the manufacturer — with full visibility over patterns, specifications, lead times, and quality outcomes from sample approval through to full-volume supply.
With 26,000+ tons of annual production capacity and buyers in 65+ countries, Everesteel supports procurement teams and panel manufacturers from initial inquiry through to repeat production orders.
26,000+
Tons annual production capacity
6,800+
Global buyers served
65+
Countries supplied worldwide
98.7%
On-time delivery rate
What Is Patterned & Decorative Steel?
Patterned and decorative steel — also referred to as printed steel or decorative coated steel — is a steel substrate that has been cleaned, pretreated, and finished with a printed design, textured pattern, or specialty surface before fabrication.
The result is a pre-finished material that arrives ready to cut, form, and assemble — with no secondary printing, painting, or surface treatment required at your facility. Patterns are applied with consistent registration and color across every coil, giving you a decorative surface that painted or hand-finished materials rarely match at the same cost and repeatability.
Patterned and decorative steel is widely specified for interior wall panels, ceiling systems, elevator cladding, furniture surfaces, appliance fronts, and signage. The right product depends on the design effect you need, your service environment, and your surface finish.
Patterned & Decorative Steel Product Range
Why Choose Everesteel Patterned & Decorative Steel
Direct from the Manufacturer — No Intermediary
Every coil is produced at Everesteel's own factory in Jiangyin, Jiangsu, on our own printing and finishing lines. You are not buying from a trading company. That means direct control over your patterns and specifications, direct accountability for quality, and no margin added by a middleman.
26,000+ Tons Annual Capacity for Consistent Supply
Our production capacity supports both sample-stage procurement and full-volume recurring orders. Whether you are qualifying a new decorative pattern or scaling an established panel line, Everesteel can maintain supply continuity without sourcing from third parties.
Full Pattern and Specification Control In-House
Because we operate our own printing and finishing lines, we match design, substrate, thickness, finish, and color to your actual application — not a generic grade. Patterns and specifications are confirmed, not assumed, before production begins.
Wide Pattern Range and Custom Design Matching
Wood grain, marble, floral, hairline, and custom logo designs are held and produced in-house. Custom pattern and logo matching is run directly on our lines, with samples provided for buyer approval before the full run.
Downstream Processing — Coil, Slit, or Sheet
Slitting, cut-to-length, embossing, pattern printing, and protective film application are all available in-house. Your material can arrive in the exact format your production line needs — not just as master coil.
Buyers in 65+ Countries
Everesteel supplies procurement teams and panel manufacturers in over 65 countries, with a 98.7% on-time delivery rate and more than 6,800 global buyers served.
Technical Specifications
| Parameter | Wood Grain | Marble Pattern | Flower Pattern | Logo Printed | Hairline Finish |
|---|---|---|---|---|---|
| Substrate | Cold-rolled or galvanized steel | Cold-rolled or galvanized steel | Cold-rolled or galvanized steel | Cold-rolled or galvanized steel | Cold-rolled or galvanized steel |
| Thickness | 0.20 – 1.2 mm | 0.20 – 1.2 mm | 0.20 – 1.2 mm | 0.20 – 1.2 mm | 0.20 – 1.2 mm |
| Width | 600 – 1,250 mm | 600 – 1,250 mm | 600 – 1,250 mm | 600 – 1,250 mm | 600 – 1,250 mm |
| Design Method | Printed / film-transferred | High-resolution printed | Printed | Custom printed | Brushed hairline texture |
| Finish | Matte, semi-gloss, embossed | Gloss, matte, textured | Gloss, matte, textured | Gloss, matte, anti-fingerprint | Hairline, anti-fingerprint, matte |
| Pattern / Color | Oak, walnut, teak, custom | Stone, veining, custom | Floral, ornamental, custom | Custom logo / graphic | Silver, champagne, custom |
| Coil Inner Diameter | 508 / 610 mm | 508 / 610 mm | 508 / 610 mm | 508 / 610 mm | 508 / 610 mm |
| MOQ | 5 tons | 5 tons | 5 tons | 5 tons | 5 tons |
| Surface Treatment | Per substrate specification | Per substrate specification | Per substrate specification | Per substrate specification | Per substrate specification |
- Specifications are indicative. Custom gauges, widths, patterns, and finishes are available on request.
- Available specifications vary by substrate, design method, and end-use application.
Applications by Industry
Processing Capabilities
Downstream processing is available in-house — orders can be delivered in the format your production line requires, not just as master coils.
Slitting
Coils can be slit to custom widths from 20 mm and above. Tight width tolerances and clean slit edges reduce material waste and downstream handling.
Cut-to-Length
Sheet blanks cut to specified dimensions with flatness and squareness tolerances suitable for direct press or roll-former feeding.
Embossing
Structural or decorative emboss patterns applied in-line. Common patterns include wood grain, leather, linen, and custom tooled profiles.
Pattern Printing
Wood grain, marble, floral, and custom logo designs printed directly onto the coated surface with accurate color matching and consistent registration across every coil.
Protective Film Application
Peelable protective films applied to the decorative surface for transit protection, scratch resistance, and clean handling through fabrication.
Sourcing slitted strip or custom-cut blanks for your production line?
Submit your width, thickness, length, and pattern specification, and our team will confirm lead time and pricing within one business day.
Quality Control and Certifications
Everesteel maintains a documented quality management system across every stage of production — from incoming substrate inspection through to final coil labeling and packaging.
In-process controls include:
- Incoming coil substrate inspection (thickness, zinc coating weight, mechanical properties)
- Pattern registration and print alignment checks against approved reference samples
- Ink and film adhesion testing
- Gloss and color measurement against approved reference standards
- Salt spray and humidity cabinet testing for selected grades
- Final dimensional check prior to packaging
Test reports and material certifications (mill certificates) are issued with each shipment. Third-party inspection — including SGS, BV, and CCIC — can be arranged on request prior to loading.
Our certifications and documented quality controls support buyer qualification, export compliance, and consistent product quality across repeat orders.
Custom Specification Service
- Custom Patterns and Logos — Submit a design file, pattern reference, or physical sample. Our technical team produces a print sample for review, followed by a production sample for approval before the full run begins. Wood grain, marble effect, floral, and custom logo designs are available across all substrates.
- Custom Dimensions — Non-standard coil widths, slit strip, and cut-to-length sheet are available in-house. Specify your width, thickness, and format, and we confirm feasibility and lead time within one business day.
- OEM and Private Label — OEM configurations and relabeled products are available for distributors, panel manufacturers, and appliance brands sourcing under their own specifications.
- Certified Company
Global After-Sales Support
- Technical Consultation — Our team reviews your application, environment, forming process, and design requirements to recommend the most appropriate substrate, pattern, and finish before you commit to an order.
- Documentation and Compliance — Mill certificates, test reports, and compliance documentation are issued with every shipment. Third-party inspection — including SGS, BV, and CCIC — can be arranged on request prior to loading.
- Inquiry Response — All product, specification, and customization inquiries receive a response within 6 hours.
Related Products
Prepainted Steel
Laminated Steel
Whiteboard & Chalkboard Steel
Aluminum Coil & Sheet
FAQs
Q1. What is the difference between wood grain, marble, flower pattern, logo printed, and hairline finish steel?
All five are decorative steel products — the difference is the surface design and how it is applied. Wood grain steel carries a printed or film-transferred timber look for warm interior surfaces. Marble pattern steel uses high-resolution stone printing for a premium luxury effect. Flower pattern steel applies a printed floral or ornamental design for decorative interiors. Logo printed steel prints your custom artwork or brand pattern directly onto the coil. Hairline finish steel uses a brushed metallic texture for a modern, fingerprint-resistant surface. If you are unsure which fits your project, share your application details and we will advise.
Q2. Which pattern is best for my application?
The right choice depends on the look and environment you need. Wood grain suits warm interior panels, door skins, and furniture. Marble pattern is ideal for premium feature walls, elevator interiors, and lobby cladding. Flower pattern works well for decorative panels, cabinet fronts, and retail fixtures. Logo printed steel is the choice for branded appliance panels and OEM products. Hairline finish is best for modern appliance fronts, elevator panels, and kitchen fittings. Share your application and we will recommend the best match.
Q3. Can you print a custom logo or pattern for my brand?
Yes. Logo printed steel is one of our core products. Submit your artwork, color reference, or a physical sample, and our team produces a print sample for review. Once you approve the design, color, and specification in writing, we produce a full production sample before scheduling the complete run. This ensures your logo or pattern reproduces accurately and consistently across every coil.
Q4. Is Everesteel a manufacturer or a trading company?
Everesteel is a manufacturer. Every coil supplied is produced at our own factory in Jiangyin, Jiangsu, on our own printing and finishing lines. We do not source product from third-party mills and resell it. Buying factory-direct means your specification is controlled at the source, and you have direct access to our technical team throughout the process.
Q5. What is the minimum order quantity?
Our standard minimum order quantity is 5 tons per specification. For custom patterns, logos, or non-standard dimensions requiring new setup, we recommend 5–10 tons. Contact us to discuss your project volume — we accommodate both sampling requirements and full production orders.
Q6. What base coating and paint systems are used under the pattern?
Decorative patterns are applied over a base coating system on the steel substrate. We use PE (polyester) base coats for most interior decorative applications, with HDP (high-durability polyester) available where added wear and UV resistance are needed. The base coat provides adhesion and durability for the printed or textured surface. We will recommend the most appropriate system based on your application and target service life.
Q7. What quality documentation is provided with each shipment?
Every shipment is accompanied by a mill certificate and test report covering the relevant parameters for your specification — including substrate properties, coating adhesion, pattern registration, gloss, and color. Everesteel holds ISO 9001 quality management system certification. Third-party pre-shipment inspection by SGS, BV, CCIC, or your nominated inspector can be arranged on request.
Q8. Can you supply material as slit coil or cut-to-length sheet rather than master coil?
Yes. We operate slitting and cut-to-length lines in-house. Coils can be slit to custom widths from 20 mm and above, and sheet blanks can be cut to your specified dimensions with flatness and squareness tolerances suitable for direct press or roll-former feeding. Sheets are stacked, interleaved with protective paper where required, and packaged for export.
Q9. What is the typical lead time for patterned and decorative steel orders?
Standard lead time is 15–25 days from order confirmation and deposit receipt. Custom patterns or logos requiring new setup may add 7–10 days for sample approval. Expedited scheduling may be available depending on production capacity at the time of order. We confirm your lead time when we respond to your inquiry.
Ready to Source Patterned & Decorative Steel? Start with the Right Information.
Send us your application, substrate, thickness, width, pattern or logo reference, quantity, and destination country. Our team will respond with pricing, lead time, and availability within 6 hours.