Flower Pattern Steel Coil & Sheet
Prepainted floral printed steel for decorative panels, appliance facings, and interior applications
Everesteel manufactures flower pattern steel coil and sheet with floral designs roller-coated directly onto PPGI and PPGL substrates. Supplied ready for fabrication, it provides a decorative printed surface without the need for secondary finishing or lamination at the buyer’s facility.
- Available in galvanized and Galvalume substrates from 0.18–1.0 mm
- Custom floral designs based on buyer artwork, samples, or design direction
- Master coil, slit coil, and cut-to-length sheet supply
- Optional embossing for added texture and visual depth
- MOQ from 5 tons with export-ready processing support
Factory-Direct Manufacturing and In-House Print Control
Everesteel manufactures flower pattern prepainted steel at our Jiangyin, Jiangsu facility. We operate our own coating and printing lines — substrate processing, pattern registration, coating weight, and dispatch scheduling are all managed internally.
We are not a trading company. Every coil that leaves our facility is produced on our own coating and processing lines, giving you direct control over specifications, lead times, and quality outcomes.
26,000+
tons annual production capacity
6,800+
global buyers served
65+
countries supplied worldwide
98.7%
on-time delivery rate
What Is Flower Pattern Steel?
Flower pattern steel is a decorative prefinished steel product in which a floral pattern is printed onto a pre-coated steel substrate through a continuous roller-coating process. Unlike film-overlaid decorative steel, the design is built into the coating system rather than added as a separate surface film.
Typical substrates include Galvalume-based prepainted steel as the standard option, with prepainted galvanized steel available for selected applications on request. A typical coating build includes pretreatment, primer, decorative print layers, and a clear protective topcoat, with removable PE protection film available where needed for transit or fabrication.
Because the surface is supplied as a ready-to-fabricate printed finish, buyers can proceed directly with cutting, bending, roll forming, and panel assembly without secondary surface finishing. It is commonly used for home appliance panels, interior wall and ceiling panels, decorative furniture components, commercial fit-out, and OEM decorative parts where a repeatable printed design is needed in coil or sheet form.
Flower Pattern Steel vs. Other Decorative Surface Options
| Criterion | Flower Pattern Steel (PPGI/PPGL) | Film-Laminated Decorative Board | PVC Film-Overlaid Steel | Painted / Powder-Coated Steel |
|---|---|---|---|---|
| Pattern integration | Within coating system | Surface film | Surface film | No pattern; solid color only |
| Forming performance | Coating bonds to substrate through forming | Film may lift at edges under stress | Film may separate at bend radii | Dependent on coating system |
| Substrate strength | High (steel) | Low–medium (board) | High (steel) | High (steel) |
| Corrosion resistance | Good (Galvalume substrate) | Not applicable | Moderate | Dependent on substrate and coating |
| Custom pattern matching | Yes — from artwork, sample, or design file | Limited | Limited | Not applicable |
| Secondary finishing required | No | No | No | No |
| MOQ flexibility | From 5 tons | Variable | Variable | Variable |
| Supply format | Coil, slit coil, cut-to-length sheet | Sheet only | Coil or sheet | Coil or sheet |
| Factory-direct supply | Yes (Everesteel) | Typically through distributors | Variable | Variable |
Why Buyers Source Flower Pattern Steel from Everesteel
Pattern Printed Within the Coating System
The floral print is applied through roller coating and integrated within the paint system, rather than relying on a film overlay. This approach supports adhesion and forming performance under typical fabrication conditions, and means there is no separate film layer to manage during processing or installation. Buyers sourcing film-overlaid alternatives may encounter edge-lifting or delamination under certain forming conditions — a variable that is reduced when the pattern is part of the coating itself.
Custom Floral Design Development
Everesteel accepts custom pattern briefs via physical sample, high-resolution photograph, or design file. The development process includes a printed proof on the specified substrate for buyer approval before production begins. Custom designs can be held as exclusive patterns on request. This capability is relevant for OEM buyers and brands requiring proprietary surface aesthetics.
Full Specification Control Across Repeat Orders
Because coating, printing, slitting, and cut-to-length processing are all performed in-house, buyers can specify substrate grade, thickness, coating weight, gloss level, emboss profile, and pattern — and receive consistent output across repeat production runs. There is no reliance on external service centers for downstream processing.
Procurement-Scale Flexibility
The minimum order quantity starts at 5 tons, making trial specifications commercially viable before committing to volume programs. Standard volume orders are scheduled against Everesteel's 26,000+ ton annual capacity with a documented 98.7% on-time delivery rate.
In-House Downstream Processing
Slitting to custom widths, cut-to-length shearing, mechanical embossing, and protective film application are all performed within the same Jiangyin facility. Buyers sourcing processed formats — such as slit coil for roll-forming lines or cut sheet for panel assembly — receive finished dimensions without relying on third-party service centers.
Direct Technical Access
As a manufacturer, Everesteel's sales team works alongside production and QC. Buyers receive material test certificates, coating performance data, and processing guidance directly from the facility responsible for production — not through an intermediary.
Technical Specifications
| Parameter | Standard Range | Notes |
|---|---|---|
| Substrate | Galvanized steel (PPGI) / Galvalume (PPGL) | PPGL recommended for most applications |
| Thickness | 0.18 mm – 1.0 mm | Other gauges subject to inquiry |
| Width | 600 mm – 1,250 mm | Slit widths available |
| Coil inner diameter | 508 mm / 610 mm | — |
| Coil weight | Up to 8 MT per coil | — |
| Coating system | Polyester (PE) / Modified polyester | — |
| Total paint thickness (top) | 25–35 µm (multi-layer) | — |
| Back coat | 5–10 µm epoxy | — |
| Coating weight (Galvalume) | AZ30–AZ150 g/m² | — |
| Gloss level | High gloss / Gloss / Matte (low gloss) | Confirm GU range at inquiry |
| Surface protection | Removable PE film | Applied on request |
| Dimensional tolerance (thickness) | ±0.02 mm | — |
| Dimensional tolerance (width) | ±1 mm | — |
| Camber | ≤2 mm / 2 m | — |
Specifications are indicative. Custom patterns, gauges, and widths are available on request. Minimum order quantity: 5 tons.
Pattern and Surface Options
Flower pattern steel is available across a range of floral designs and finishes, weighted toward appliance, interior, and furniture applications.
Small Repeating Florals
Fine, evenly spaced floral motifs for a subtle decorative texture. Widely specified for appliance side panels and interior facings where a soft pattern is wanted without a busy look.
Large Feature Florals
Bold, larger-scale floral patterns for feature panels and statement surfaces where the design is meant to draw the eye.
Vintage / Classic Floral
Traditional floral styles with warm tones, suited to furniture surfaces, cabinet facings, and residential interior work.
Custom Floral Artwork
Submit your own design and we develop a dedicated pattern to match — with a production drawdown provided for approval before the full run.
High Gloss Finish
A bright, reflective topcoat that lifts the color and gives the floral surface a clean, polished look for visible panels.
Matte / Low Gloss Finish
A flat topcoat with reduced reflection for a soft, understated decorative surface — well suited to interior panels and furniture facings.
Processing Capabilities
All processing is performed in-house at Everesteel’s Jiangyin facility.
Slitting
Coil slit to custom widths within the range of 20 mm – 1,250 mm. Suitable for buyers feeding roll-forming or automated panel assembly lines.
Cut-to-Length
Sheet cut to specified length with a tolerance of ±1 mm. Supplied in flat sheet format, stacked and interleaved.
Embossing
Mechanical emboss applied to the coated and printed surface. Available profiles include stone grain, linen, and micro-texture. Emboss depth and pitch are subject to tooling availability — confirm requirements at inquiry stage.
Protective Film Application
Removable PE surface protection film applied on request for applications requiring additional surface protection during forming or transit. This is a protective film service, not a decorative lamination process.
Custom Pattern Development
Lead time for custom pattern development is typically 2–3 weeks from approved design brief to print proof, with production commencing following buyer sign-off.
Packaging
Coils are wrapped in moisture-resistant paper with steel banding. Cut sheets are palletized with edge protection and stretch-wrapped. Export packaging complies with standard container loading requirements. Specific packaging instructions can be accommodated on request.
Sample Policy
Material samples (printed coil or cut sheet, approximately A4 size) are available prior to order placement. Sample requests should specify substrate, thickness, pattern, and finish.
Sourcing slit strip or custom-cut floral-pattern blanks for an appliance or interior project?
Send your width, thickness, substrate, and pattern reference, and our team will confirm lead time and pricing within one business day.
Recommended Specifications by Application
| Application | Recommended Substrate | Thickness | Pattern Suggestion | Finish |
|---|---|---|---|---|
| Home appliance panel (refrigerator, range hood) | PPGI or PPGL | 0.3–0.6 mm | Small repeating or custom floral | High gloss or gloss |
| Interior wall cladding panel | PPGL (Galvalume) | 0.4–0.8 mm | Any standard or custom | Matte, gloss, or embossed |
| Decorative furniture surface (cabinet, wardrobe liner) | PPGI or PPGL | 0.18–0.5 mm | Small repeating or classic floral | Matte or matte embossed |
| Commercial fit-out / partition panel | PPGL (Galvalume) | 0.4–0.8 mm | Large feature or custom floral | Gloss or matte |
| Ceiling tile / modular panel | PPGL (Galvalume) | 0.4–0.8 mm | Any standard | Matte or embossed |
| OEM component manufacturing | PPGI or PPGL | 0.18–1.0 mm | Per buyer specification | Per buyer specification |
- Specifications listed are indicative. Buyers should confirm suitability against their fabrication process and end-use requirements.
Typical Applications
Flower pattern steel coil and sheet are used across the following industries and product categories:
Quality Control and Certifications
Everesteel maintains in-process and outgoing quality inspection across coating weight, paint adhesion, gloss level, color and pattern consistency, and dimensional tolerance.
In-process controls include:
In-process controls include:
- Incoming galvanized / Galvalume substrate inspection (thickness, coating weight, surface quality)
- Print registration and pattern-alignment checks at the coating line
- Paint film thickness measurement across the multi-layer system
- Adhesion testing (cross-cut and T-bend)
- Gloss and color measurement against approved reference standards
- Pencil hardness testing for selected grades
- Final dimensional and appearance check before packaging
Test reports and mill certificates are issued with each shipment. RoHS-compliant coating formulations are available, and our facility is ISO 9001 certified. Third-party inspection — including SGS, BV, and CCIC — can be arranged before loading on request.
FAQs
Q1. What is the minimum order quantity?
The standard MOQ is 5 tons. Trial orders within this threshold are accepted. For custom floral patterns, an additional minimum may apply depending on printing setup requirements — confirm at the inquiry stage.
Q2.How does printing the pattern within the coating system differ from a film overlay?
With roller-coat printing, the floral pattern is integrated as part of the paint system applied directly to the steel substrate. There is no separate film layer. Film-overlaid products carry a distinct surface layer that is mechanically bonded rather than chemically integrated — which can behave differently under forming conditions, particularly at bend radii or cut edges. The roller-coat approach reduces this variable, though performance in any specific application depends on the coating system, forming parameters, and end-use environment.
Q3. Can you develop a custom floral pattern from our artwork?
Yes. Everesteel accepts physical samples, photographs, or design files as the basis for custom pattern development. A printed proof on the specified substrate is submitted for your approval before production begins. Custom designs can be held as exclusive patterns on request. Lead time from approved design brief to print proof is typically 2–3 weeks.
Q4. What substrate options are available?
Galvanized steel (PPGI) and Galvalume (PPGL) are both available. Galvalume is recommended for most applications due to its corrosion resistance profile. Specify your substrate preference — including coating weight class — at inquiry.
Q5. How long does production take?
Lead time for standard patterns on stock substrate is typically 15–25 business days from order confirmation and deposit receipt. Custom pattern development adds approximately 2–3 weeks for design approval prior to production. Contact the sales team for a schedule specific to your order volume and specification.
Q6. Is Everesteel a manufacturer or a trading company?
Everesteel is a manufacturer operating its own coating and printing lines in Jiangyin, Jiangsu. There is no intermediary between your specification and production. Buyers have direct access to technical staff and full traceability of production records.
Q7. How is the surface protected during transit and fabrication?
A removable PE surface protection film is applied on request. Standard export packaging includes moisture-resistant wrap and banding for coils, and edge-protected pallets for cut sheets.
Q8. What quality documentation is provided with each shipment?
A mill test certificate is issued per coil or batch as standard. SGS or third-party inspection can be arranged on request. Additional documentation for specific project or import requirements is available — advise at order stage.
Q9. Can you support regular scheduled supply for ongoing production needs?
Yes. Everesteel works with distributors and manufacturers on volume programs with agreed call-off schedules. Contact the sales team to discuss forecasting, safety stock arrangements, and pricing structures for recurring orders.
Related Products
Wood Grain Steel
Marble Pattern Steel
Logo Printed Steel
Hairline Finish Steel
Ready to Source Flower Pattern Steel? Start with the Right Information.
Send us the details below and our team will respond with pricing, lead time, and availability within one business day.
- Application — what the material will be used for (e.g., appliance panel, interior wall panel, furniture surface)
- Thickness — in millimeters (e.g., 0.40 mm)
- Width — in millimeters (e.g., 1,000 mm)
- Substrate — galvanized or Galvalume, and coating weight if known (e.g., Z80, AZ50)
- Coating type — PE, SMP, or not sure yet
- Pattern reference — a floral design name, physical sample, or artwork file
- Quantity — in metric tons, and whether one-time or recurring
- Destination country — for freight and lead time estimation